3D Print Stringing – It’s Causes , How to Avoid & Fixing Tips

3D Print Stringing

Imagine using a 3D printer for the first time, after spending a lot of money and effort, and it gives you a hairy and useless print. The worst part about this is that you can’t do anything about it.

I have gone through this, and it was nothing but pure frustration and disappointment when you came to know that it has nothing to do with the 3D model, and it all happened because of a foolish filament and nozzle issue.

If you don’t want to face what I gave gone through, stick with this article and educate yourself about this irritating issue!

Here, we will tell you everything about 3D prints stringing, its causes, how to avoid it, and how to solve it in no time.


What is 3D print stringing?

It is a phenomenon in which a 3D printer user gets a hairy or useless print because of plastic oozing. This type of problem usually happens when small whiskers of plastic are left behind on a 3D printed model.

The common reason behind this condition is plastic oozing, that comes out of the nozzle during the extruder (machine) travels from one location to the other.

When the nozzle moves across, from one point to the next, It oozes melted plastic, which then sticks to the printed parts and solidifies over there.

Hence, it leaves your 3D printed parts with thin strings of plastic that resemble long thin hair, or sometimes, like a cobweb as well.

In the end, these strings cover your entire model with plastic strings and make it completely useless. This is a very old and long-standing problem that every individual faces, whether he/she is a professional or just a beginner.


Causes of Stringing in 3D printing?

Cause no-1

One of the primary reasons for this issue is the melting of plastic filaments and their emission from the nozzle’s unused areas. What happens that when the nozzle moves from one place to the other, stringing starts to begin in the middle of the empty gaps.

Hence it leaves behind small pillars or filament, which are then connected by the strings and eventually lead the strings to the rest of the print.

Cause no-2

Some other very common reasons are incorrect retraction settings and setting the hot side temperature very high.

For example, PETG requires a quite high temperature for melting and is infamous for stringing. On the other side, PLA and ABS also famously have this problem.

Cause no-3

The speed at which a 3D printer operate plays a big role in stringing. If a 3D printer works too quickly, it increases the risks of creating holes, which leads to stringing.

Keep in mind that most of the 3D printers have an adjustable speed, and their manufacturer companies can speed-up or down their printers. However, using a printer at a rapidly fast pace will make it imperfect and creates holes in it.


How to avoid 3D stringing?

There are several factors that lead to the stringing, and once it happens, it will undoubtedly destroy your whole work. But, before that, certain adjustments can help you to avoid 3D stringing.

These adjustments will decrease the chances of such an unfortunate incident to happen. So, before using a 3D printer, take a look at these things.

  1. The filament should be moisture-free.

Keep in mind that the filaments absorb moisture very quickly once they are exposed to open air. This moisture is stored in the form of microscopic bubbles inside the filament and keep expanding until they reach the high temperature of the nozzle.

Once they subject to the high temperature, they burst immediately and leave a pockmark on the print. Other than that, these moisture bubbles can also become a reason for stringing.

Make sure that you store your filament in an airtight container with a few packets of desiccants in such a critical condition.

Another possibility is that you can dry your filament inside the oven before using it, but make sure that you set a moderate temperature; otherwise, you’ll end up destroying them.

  1. The nozzle should be cleaned.

If you’re printing for a few hours and utilizing the same filament, the filament material will start emitting a kind of residue on the nozzle’s inner surface.

After that, if you keep using that nozzle, it will reduce its ability to hold at one place, which ultimately allows the molten filament to move freely and increase the chances of stringing.

It is better to clean your nozzle after every printing session of a few hours to neglect such a condition again. The easiest way of doing is to remove the nozzle and clean it with metal wires, or simply dip in the acetone.

  1. Maintain a lower printing temperature.

If you’re using a dry filament and cleaning the nozzle on time and facing the same stringing problem, then it’s time to check the temperature at which your printer is operating.

When you alter the temperature setting, make sure that the new configuration is according to the filament you’re using; if not, it will lead you to a new extrusion problem.

However, you can reduce the extrusion speed, which will allow the filament extra time to melt because of the low temperature.

There is a temperature calibration test that will inform you about the most suitable temperature for your printer.


Ways of fixing 3D prints stringing.

Stringing is a worldwide common issue that every user will come across sooner or later, and most people; who are unaware of these facts will struggle to solve this issue.

These are some basic methods through which one can efficiently resolve this issue without seeking anyone’s help. Earlier, we have discussed; how to avoid this problem, but if it occurs again, these methods will eliminate them.

  • Enable retraction.

The most accurate method to solve this problem is to enable retraction. It means that the extruder has to cross an empty space, while the filament will be pulled a little back by the feeder.

It will prevent the molten plastic from leaving behind as the printer head moves ahead. Once the extruder reaches its new position, the filament will be pushed back, and printing starts from the beginning again.

Retraction Distance:

Retraction distance is generally known as the distance covered by the filaments. If your nozzle can retract further, it shows that there is less chance of your printer to face stringing. The retraction distance generally depends upon the type of extruder you’re using.

Retraction speed:

It is known as the rate at which retraction takes place. The faster it retracts, the lesser chances it will have of stringing, because the filament will be pulled back before it starts oozing.

But, if the retraction speed is too fast, it will disconnect the filament from the nozzle’s inner part.

  • Maintain an average printing speed.

Moderate printing speed is essential to make sure that there is no stringing. If the printing speed is low, it will allow extra time for the molten plastic to ooze out of the nozzle.

Similarly, if the rate is too fast, and the temperature is low, the plastic will lack enough time to drip.

A speed of 190-200mm/sec is the most suitable for most of the printing materials.


3D prints stringing is a standard printing issue that even a professional user has to face. It’s not that complex, but because of multiple factors and different models, it is hard to tell why it is happening.

In this article, we’ve tried to cover all the basics and tried to explain all the methods through which you can avoid and solve this issue.

We hope you like our article and do tell us in the comment section, whether it is helpful for you.

Thank you!

Comgrow Creality Ender 3 3D Printer Review

Comgrow Creality Ender 3 3D Printer3D Printing is need of the hour and is widely used all over the world by the industries and professionals. Nowadays, 3D printing technology is increasingly becoming common in every aspect of life.

Whether you are a student, a businessman, doing a job, or any other profession, 3D printing is what you can do anywhere and anytime.

It is believed that people who are fond of 3D printing have a creative and innovative mind and approach.

3D printing really helps in creating simulation and to make a visual representation of your thoughts and ideas. The concept of virtual reality is what 3D printing is all about.

There are several things that you need to look for in a 3D printer if you want to have a good experience of using it. Mainly you will look for the types of 3D printer, the material used for printing, slicing software, safety, quality, and of course, the price.

Primarily, it depends on the needs and requirements of the user. First, you need to clear yourself for what purpose you need a 3D printer and what kind of projects you are going to make using this printer.

It’s not an easy task to pick up the right 3D printer because there are varieties of options available in the market, which can be devastating if you are not sure what you are looking for.

Since you are here, you must be clear about your objectives and requirements. So to ease your search, here in this article, we are going to give you a detailed review of one of the best high-quality 3D printers we have found, and that is none other than Comgrow Creality Ender 3 3D Printer Fully Open Source with Resume Print Function.

After reading this article completely, you will surely have the best solution in your hand for your 3D printing requirements. So let’s quickly go through the main specifications below to check out how it can be the best suitable 3D printer for us.

  • Brand Name: Comgrow
  • Item Weight: 64 pounds
  • Model Number: Ender 3
  • Product Dimensions: 8.7 x 8.7 x 9.8 inches
  • Upgraded design
  • Power supply ensures stable and sufficient power.
  • Can resume printing after a break
  • Perfect for STEM projects
  • Certified


There is no doubt that technology comes with the price; however, everyone wishes to have the latest product in an affordable price range; the product should have all the necessary tools and features required.

It turns out to be challenging to select the best one when you have so many options available to choose from. Each 3D printer offers different functions and facilities, so it is very important that before ordering the products, you know what your requirements are.

Considering the affordability, efficiency, and reliability, we have found out that ComgrowCreality Ender 3 3D Printer can be the best pick for you.

This printer is equipped with the latest tools and technology and has all the necessary features required to make it function at its best. Be sure that it will prove to be the best 3D printer for you.

Design and Features:

It is important that you check the credibility of the brands you are going to order the 3D printers or anything else. No one wants to spend their money on ineffectual products.

ComgrowCreality is an established and certified brand when it comes to manufacturing and supplying 3D printers and accessories. Comgrow products are provided all over the world, and due to the effectiveness and affordability, their 3D printers remain in high demand.

The unique features and functions of ComgrowCreality Ender Printers make it the most selling and top-rated product of this brand.

A highly skilled team is deployed on manufacturing and testing of the products, so there is no chance that you will get a defective product.

One of the best things about the ComgrowCreality Ender 3 3D Printer is that it gives you a semi-assembled kit with clear instructions on how to put it all together. As you join it together, you will get familiar with the interface and its usage.

One of the unique features of this printer is that it resumes printing from where it stops, so if you want to take a break in between or there is a power outage, you don’t need to worry about it as it will continue from the point from where it is stopped.

The printer uses advanced extruder technology, which is designed to lessen the possibility of a clogged nozzle, bad extrusion, and dramatically reduced plugging risk.

The exterior of this printer is carefully designed with high-quality, durable material, the V-Shape with POM wheels make it move smoothly without creating any noise.

It has a removable build surface plate, which is one the important factor to consider when buying a new printer because the build surface of the printer is responsible for the protection of your build product and maintaining the temperature throughout the surface.

With a licensed power supply, this printer needs only 5 minutes for a hotbed to reach 110℃, which ultimately saves your time and energy.

To ensure that you get the best result out of it, the key components are tested thoroughly before it is supplied to you. In case you need any assistance, life-time technical supportsare available.

  • Can be used by kids or beginners
  • Easy to set up and use
  • Affordable and long-lasting
  • High precision printing
  • Fully open-source
  • Need to change the setting when using different filament
  • Beginners may find it difficult to set it up.
As mentioned earlier, the products of ComgrowCreality passes through a testing phase, so there is no doubt that you will get a faulty product.
Considering the affordability and effectiveness, we believe that ComgrowCreality Ender 3 3D Printer is the best pick for you.
As the stock is limited, you should order it as soon as possible before it becomes unavailable.

Creality Ender 5 3D Printer 2021

Creality Ender 5 3D Printer
Ender 5 3d Printer Review

As the world is rapidly moving towards digitization, it becomes easier for us to do any task with the help of the latest technology. When it comes to printers, now we have 3D printers that are helpful for creating mockups or models before making the actual products.

If you have an innovative or creative mind or have an interest in designing prototypes of different projects, a 3D printer is a must for you. 3D printing is an invention which fuels more innovation; big companies are now looking for 3D printing experts.

With the help of 3D printers, you can visualize your thoughts and ideas and create a simulation before making an actual print. It saves not only your money, but also resources, time, and energy.

3D printing is advantageous if you want to design a customized object, as you can make several changes to it without wasting the material. The best printer is the one which you can use easily, give accurate and precise results in the given time.

If you are a beginner or not familiar with the type of printers, it becomes challenging for you to choose the best one that suits you. There are hundreds of 3D printers available in the market, each one offering different features and functionality.

It mainly depends on the needs and the requirements of the user, which printer is best for you. However, some printers are suitable in all situations, a one for all. Here in this article, we are going to present you with a detailed review of one such 3d printer, and that is Ender 5 3D Printer.

It has some unique features which differentiate it from other 3D printers. Whether you are a beginner or a professional, this printer proves to be the best choice for all your printing requirements.

Let’s quickly go through some of its main specifications to get an idea of it.

  • Brand: Creality
  • Print Dimensions: 220*220*300mm
  • Frame: Aluminum
  • Nozzle quantity: 01
  • Machine power: 350W
  • Connectivity: SD Card, USB
  • Slicing Software: Cura, Repeti-Host, Simplify 3D
  • Printing materials: PLA, ABS, Soft Glue, Wooden, Copper Containing, Gradient, etc.
  • Net Weight: 11.8 kg
  • Machine Size: 552*485*510mm

In-Depth Review:

As the 3D printers are expensive, you will look for the best one at the minimum price.

Some of the most important factors you need to look for in a 3D printer are the quality of the prints you want to produce, the material you are going to use for prints, the printing speed you need, and the required build area to print.

In addition, you will also need to look for the software it uses and the connectivity options it offers when buying the 3D printers.

As you are here, just read the article till the end, and you will have the most suitable solution for your printing problems in your hand.

As we are reviewing Creality Ender 5 3D Printer, let’s check out its design and features to get to know better.

Design and Features:

One of the most important thing to check out when buying the 3D printer is the brand or the manufacturer company. Ender 5 3D printer is a product of Creality, one of the most trusted names when it comes to purchasing 3D printers.

Delivering certified products, Creality 3D printers are being used all over the world. Whether you need it for personal or for the business use, Creality Ender 5 3D printer is perfect for all.

This 3D printer offers you a wide variety of tools and features. To give you precise and high definition quality prints, this printer has Y-axis motors and down-shift Z-axis, which make the prints look perfect.

One of the unique features of this 3D printer is that prints can be resumed from where you have left; it saves a lot of your time and resources.

It has an integrated power supply, which also helps in balancing voltage spikes and power outages. The printer has the capability to heat up the build surface to 110℃ in 5 minutes.

Unlike other 3D printers, the Ender 5 3D printer specialty is that it has a dual Y-axis motion control system through which you get the high-quality print results with complete accuracy.

This Ender 3D printer can continuously operate for 200 hours with stability and consistency. An industrial circuit board is integrated for a high-load safety inspection.

You can use the Ender 3D printer even if you are new to 3D printing; you can use this product as it comes with a user-friendly interface which is easy to understand by everyone and semi-assembled equipment so that it does not take much of you time in assembling the parts of the printer.

In case you are a beginner, you can take help from a handbook that provides easy-to-understand steps for installing and operation.

With all these features and functions, you can also monitor the prints while it is in process, by this, you can modify the print in between if you see any error in it. It will ultimately save your time, materials and in the end you will get an error-free prints.

  • Easy to assemble
  • To the point detail and incredible resolution
  • Relatively requires low maintenance.
  • Reliable, durable, and cost-effective.
  • A little bit noisy
  • Beginners may find it difficult to load filament.
If you need a 3D printer with advanced features at an affordable cost, we believe that the Creality Ender 3D printer is one of the best product you can have. It has all the features and characteristics which make it perfect for us to buy this printer.

There is no doubt that Creality produces high quality and efficient 3D printers at a low cost so that it can be made accessible to everyone. Go for it and order it without any hesitation.

Top 9 Best Creality 3D Printers 2021 Reviews & Buying Guide

Best Creality 3D PrintersWhether you are looking for a 3D printer as a hobbyist or a professional, its equal to impossible to go wrong with one from Creality’s long lineage.

Creality, in fact, appears to be quite keen to launch the iterations and enhanced versions of its printers. No Matter if you are searching for CR Series or Ender 3d Printers we have covered both so you can decide what to choose from.

If you want to start your career with some Basic 3d Printers and you are totally Beginner it is totally fine. These Creality Printers will going to help you in doing amazing 3d printing in no time.

This article will review 9 Best Creality 3D Printers in detail, explaining the similarities and differences between various models, to share your buying burden. We are sure that by the end of this read, you will be qualified to make an informed decision.


Official Creality Ender 3 3D Printer
(Editor’s Choice)
Official Creality Ender 3 Pro 3D Printer
Official Creality Ender 5 All-Metal 3D Printer
Official Creality 3D Ender 5 Plus 3D Printer
Creality 3D Printer CR-10 Mini 3D
Official Creality 3D Printer CR-10 V2
Creality 3D Printer with CR-10S Pro V2
Creality CR-10S Prusa I3 FDM 3D Printer
Official Creality CR-10 Max 3D Printer


1. Official Creality Ender 3 3D Printer

Official Creality Ender 3 3D PrinterEnder 3 was launched in March 2018 when Creality had already earned a name with the launch of CR-10 in 2016 and became known in the 3D world. However, Ender-3 was warmly welcomed due to its being a budget price printer with great print quality and user-friendly features.

Owing to these three features, Ender3 made itself the best choice for first-time users and students.

Unlike the majority of the other Creality printers, which are closed source, Ender3 is an open-sourced printer. Therefore, all its documentation and firmware can be accessed on the official page byCrealitynamed Github. This allows developers and other hardware operators to keep their printers updated by the newly introduced upgrades by Creality. Due to this attraction, Creality Ender 3 has become many 3D enthusiasts’ choice.

Its nozzle diameter is 0.4 only while the layer thickness can be adjusted between 0.1-0.4 millimeters.

Its hotbed is heated at the maximum temperature of 110 degrees Celsius while the maximum temperature recorded for the nozzle is about 255 degreesCelsius.

Another plus of Ender 3 is that it can also work on offline mode via SD card.

In sum, Creality Ender 3 can be the best choice for those who are on a budget as it is well equipped with everything a 3D printer is supposed to have. However, it cannot be called the best in Creality lineup as there are many better options available. Even if you bring your budget a bit up, you can have Creality CR-10 which outperforms Ender 3 in many respects-as its printing bed has much better temperature and is relatively faster in printing operations. However, much to our disappointment Creality-10 doesn’t remember where it left off in case of a power cut and you have to manually restart all over again.

  • Easy assembly, comes partially assembled
  • It will not forget the position of the extruder in case of a power outage
  • Great value for your money
  • The print bed is not flat
  • The print bed doesn’t get as heated as required
  • Struggles badly with ABS printing
  • At times, print takes forever to come out



2. Official Creality Ender 3 Pro 3D Printer

Official Creality Ender 3 Pro 3D PrinterWith its launch in September 2018, Ender 3Pro took Creality fans by storm. Three major differences can be noticed in Ender 3 Pro,from its original version Ender 3. They are increased stability, a magnetic printing surface, and a certified power source.

With these added features, it makes itself a perfect budget-friendly present for the upcoming birthday of your game freak teenager! Its easy assembly, quality performance, and user-friendly interface, it will surely appease all his weird gaming fantasies.

Its cut-price should not make you think that Creality must have compromised on its printing performance. Once you start printing with it, you will experience that it rather exceeds all your expectations by providing you with the nearly perfect final products.

Like a dutiful successor of Ender 3, Ender 3 Pro has ironed multiple lapses of its precursor. As mentioned earlier, it is made more stable with a sturdy aluminum extrusion which is added to its Y-plane.

To make it more stable, Creality has installed stiff bearings in Pro version which resulted in reduced friction and made the whole build stand more firm during printing operations.

One more feature which is improved in Ender 3 Pro is the addition of C-MAG, which is a magnetic printing bed and allows you to stick the first layer on the bed thoroughly so that you don’t have to set it again and again during printing. It also makes removal easier. You can pluck the printed models off the bed smoothly without getting the base damaged.

You will be surprised to know that Ender 3 Pro, like the priciest 3D printers in the market, is versatile enough to smoothly handle not only ABS, PETG, PLA but also several exotic filaments.

You will highly appreciate its easy assembly and user-friendliness it offers to its users. To quote an example, although it has a manual bed leveling system, however, the company took special care to place a big bed-leveling knob on the printing bed, which has made calibration easier. It gets the printing bed leveled in a few moments.

My only quibble about Ender 3 pro is that its base is quite wobbly, which keeps giving speed bumps to the whole-body during printing operations. However, if you choose to support one of its borders with a wedge, this issue will be resolved.

Putting this issue aside, there are numerous reasons I should recommend you Creality Ender 3 pro, as it is incredibly cheap, has a decent build, resumes printing after an accidental power outage, and has a narrow filament passage.

  • Unbelievably affordable
  • Open source printer
  • Swappable nozzle
  • Narrow filament passage to make it compatible with other filaments
  • Compact
  • Easy to assemble
  • A power recovery mode
  • Decent print area
  • Premium quality prints
  • Uneven base
  • Wobbles under pressure
  • Manual calibration
  • A magnetic bed may not be liked by everyone
  • Doesn’t iron some of the flaws of its predecessor, Ender 3
  • Requires frequent re-leveling



3. Official Creality Ender 5 All-Metal 3D Printer

Official Creality Ender 5 All-Metal 3D PrinterIf you are a hobbyist and love to experiment with large print models, Ender 5 with its increased stability and metal frame will provide you the sheer pleasure of printing massive props and models with ease and precision, though with a higher price as compared to Ender 3, its precursor.

Its relatively higher price is also justified in many ways. For instance, its MK 10 hot end and heated bed, which significantly decreases clogging and doesn’t let the filament jam inside.

As far as the main hot end and extruder assembling procedures are concerned, there is no difference between Ender 3 and Ender 5. However, its main operating system is completely different.

With its improved motion system, its hot end moves on XY-axes instead of moving along XZ-plane. Creality also added 50mm more space to the Y dimension, making 250mm of Ender3, 300mm and the result is relatively a larger build space.

Its bed springs are also made better as compared to Ender 3. It uses Uxcel springs which are improved in two ways- firstly they manage the burden in a better way and secondly require less frequent bed leveling.

Its manual is also improved with the inclusion of a step by step procedure to assembly and addition of pictorial illustrations. Right out of the box, you will require no more than 20-25 minutes to assemble and get your first print.

Another difference it offers from its parent 3D printer, Ender 3 is that it uses Meanwell power supply while Ender 3 uses a conventional motherboard as a Firmware.

For improved safety, not only Ender 5 but all the Creality 3D printers are provided with thermal runaway protection.

Like Ender3, Ender 5 is also moddable. New features like an auto-leveling function termed as BL-touch can be added to improve leveling. Another upgrade to be added is Sikent Motherboard, which abundantly reduces noise during operations.

Honestly, Ender 5 is hailed by the hobbyists well, as it has all thefeatures, theywere expecting from Ender 3. By this, we don’t mean that Ender 5 is the end-all. It has its loopholes too which are addressed in its follow-up versions-Ender 5 Pro and Ender 5 Plus which is its magnified iteration.

  • Reliable
  • Good print quality
  • Affordable
  • Easily accessible power slots
  • Quiet printing
  • The magnetic bed is too fragile to last long
  • The intricate filament loading process
  • Some functions not elaborated in the instruction manual
  • Manual bed leveling



4. Official Creality 3D Ender 5 Plus 3D Printer

Official Creality 3D Ender 5 Plus 3D PrinterAnother 3D printer from the new flagship of Creality’s Ender family! The series is aimed to make 3D printers approachable for everyone, even those with a low budget. And at the same time,Creality has made these machines reliable.

Let’s start with its obvious feature-its massive outer volume is 632x666x619 mm while the inner volume is 220x220x300mm. This colossal build is a big plus for the Creality fans to have additional space for larger prints.

, it becomes troublesome for those who don’t have enough space to keep it at their worktable.If space is not an issue for you, you are highly advised to go for this and take your 3D printing to the next level. Let me tell you here that you should not expect any component out of this outer volume as it finely holds its power supply and filament inside its frame.

Like Ender 5, Plus also has its print head built at the top of printer body and the print bed slides on Z-plane during operations.

Another similarity with Ender 5 is that it has an independent stepper motor placed at each axis. And the motor at Y-plane runs both the belts simultaneously.

Quite like Ender 5, it has a print resume function if you have frequent power cuts. Also, it has a filament level sensor that warns you well before the printer runs out of filament.

For increased stability, four rods and two lead screws are installed at the bottom of the colossal print bed.

A glaring issue with Ender 5 Plus is that its bed leveling is manual. However, the presence of large knobs has made it slightly easier and you can expect to turn screws smoothly.

With these few quibbles, Ender plus is still worth spending some extra bucks, with some tinkering on the part of the operator, though. It is the right option for you if you want good printing results without messing around.

If you are still not convinced, you may read our Creality CR-10S review as it is almost similarly priced but hasabetter print quality and needs less fiddling.

  • Operation resume function at power outage
  • Massive build
  • Stable
  • Quality prints
  • Stable
  • Manual bed-leveling
  • Needs a lot of space



5. Creality 3D Printer CR-10 Mini 3D Aluminum DIY Printer

Creality 3D Printer CR-10 Mini 3D Aluminum DIY PrinterThis can be the best affordable option packed with various user-friendly features. The best thing about CR-10 Mini is its ability to resume the printing operation. The printers often stop in the middle of operations -due to power cut, clogging, or any other lapse. And it becomes very difficult for the operator to resume where he/she has left from. This problem is best addressed in the CR-10 Mini. And it saves a lot of material wastage.

Unlike other mini printers, CR-10 Mini is at least twice the volume of the other 3D mini printers available in the market. However, as compared to its big brethren CR-10 it is small enough to be packed inside its elder sibling.

Best utilizing its space, CR-10 Mini shares many of the great specs of CR-10 family.

This includes a removable heated glass bed for printing, compatibility with ABS and PLA and fast printing speed.

You will love to learn that it is highly moddable and you can upgrade its any part and enjoy staying up to date. The features like all-metal extruder or secondary Z-rod may interest you in this regard. This feature makes CR-10 Mini a great pick for those who want to keep their appliances upgraded.

It will amaze you with its printing accuracy at the rate of 0.1 mm only. CR-10 Mini runs at the minimum speed of 80mm/s while at maximum the speed may cross 200mm/ second.

Equally fit to run on various operating software, including Windows, Linux, and OSX, CR-10, Mini works ideally at the temperature between 10-39 degrees Celsius with the humidity level between 20-50 percent.

Assembly is as minimum as possible. Therefore, new and inexperienced users don’t need to fret. Within 15 minutes after unboxing it, you should be ready to get your first model printed out. The better way to assemble it without encountering any problem is to play its official assembling video on the site and follow the step by step procedure.

In gist, CR-10 Mini is rightly named as it is a mini version of CR-10 and shares all the best and worst in CR-10. It also does away with the unreliable 3D stock spare parts placed in CR-10.

  • Easy to assemble
  • The high printing accuracy rate
  • Highest ever printing speed
  • Resume printing system
  • Cons number one
  • Cons number two
  • COns number three



6. Official Creality 3D Printer CR-10 V2 New Version

Official Creality 3D Printer CR-10 V2 New VersionIt is an outstanding 3D printer, reasonably priced and highly recommendable to the beginners, intermediates and expert professionals alike. It came to the market in 2016 and is the fourth generation in Creality’s long lineage. Although its iteration with the name Creality – 10S was also launched shortly after its release, this original version seems to be a better investment.

After reading consumers’ reviews thoroughly on different buying sites online, it is fair to conclude that apart from a few issues solvable issues, Creality-10 by far has been an excellent 3D printer, especially for printing miniatures as it prints with detail and precision. And the final product it delivers to consumers needs very little finishing touches.

This is the reason that hundreds of reviewers from across the globe generously expressed their pleasurable experience of printing their 3D models, props, and costumes with Creality-10. They praised CR-10 for its affordability, user-friendliness, and high-resolution.

What mainly makes it the best choice for printing miniatures is its standard nozzle with 0.4 diameters. It renders the printer the ability to perfectly run its head on the model detailing with fineness and perfection.

It works equally well on huge statues because it has a large printing bed which is always a wise option to choose in 3D printers as it helps print large models and costumes in one go and you don’t need to trouble yourself with the welding process after printing.

In all, it may be called as a multi-functional printer which prints high resolution small as well as large models with equal ease.

As for reliability, it should be rated higher than other Creality3D printers with the same price tag.

You will find it handling PLA and PET with perfection. However, it is also said to go well with ABS. the final product CR-10 delivers is always smooth and finely surfaced which needs no finishing. A few consumers reported that they tried CR-10 for nylon and other stretchable filaments and their printer did not disappoint them at all. If it is considered true, CR-10 becomes a more economical choice as with this you will have to spend less on filaments.

You will have a few extra tools and other things delivered with your CR-10. These things become a real bonus at such a low cost. You will be delivered PLA filament, one masking tape for bed adhesion, an additional PTFA tube, a usable spool, an instruction manual, a USB card reader, and an SD Card.

  • Pros number one
  • Pros number two
  • Pros number three
  • Cons number one
  • Cons number two
  • COns number three



7. Creality 3D Printer with CR-10S Pro V2 BL Touch Auto-Level

Creality 3D Printer with CR-10S Pro V2 with BL Touch Auto-LevelCreality’s famous CR-10 lineup has several iterations that at times one feels that one is losing the count. One of the smart 3D printers from Creality CR lineage is CR-10S Pro V2, which seems to eclipse many of its younger brothers in features, though at a slightly higher cost.

It has ironed out many of the lapses found in CR-10S Pro which has disappointed many of Creality’s regular consumers with its poor-quality prints. Significantly improving on print quality and performance, CR-10S Pro V2 has become a reliable pick for many around the globe.

Its sleek look catches our eyes in the first glance. However, it has a web of cables all around which is a typical feature of all Creality 3D printers.

The main unit of this printer is added at the bottom so that printer doesn’t occupy enough place by expanding its footprints. An additional advantage of putting this brain at the base is that printer is made more stable and doesn’t let the machine wobble in the middle of operations.

However, this architecture has added a few extra inches to printer’s height which becomes weirdly tall for a printer when you add filament spool at the top, making it too high to be accessed properly. However, if you are tall and have a vertically spacious place to keep the printer, that shouldn’t be a big deal for you.

Much to our annoyance, Creality didn’t think of positioning its power, USB, and SD card ports on the façade of the machine, which could have been relatively easier to access.

These ports are conventionally located at the rear of the machine, which becomes fretting. However, this problem can be borne with.

Then comes its printing bed which is far too sticky and refuses to leave the printed models. It should be called a boon and bane at the same time as while setting the bed you don’t have to worry about the printings coming off the place again and again, however, once the job is done you find yourself combatting with the models and at times spoil the base. There is an additional risk of gouging the bed surface too in the process.

If we forget theses quibbles for a while, CR-10S Pro V2 appears to be a neatly packed machine with an elaborated manual to set up the few screws, plugs, and wires it comes with.

True to its claim, CR-10S Pro V2 has an automatic bed leveling. But remember to manually set the plate initially, and then its BL-Touch sensor does the rest of the job of uniforming the layers and everything across the printing bed.

Its filament slides gently inside and doesn’t pose any buckling issues to the user’s inconvenience.

The operations are made easier with the help of Cura-powered slicer which helps you customize the settings not only according to your level of expertise but also the sophistication level you require from your prints.

In all, it’s a great go-to for those who are searching for a reliable, easy to use and easy to put together 3D printer with quality performance.

  • Pros number one
  • Pros number two
  • Pros number three
  • Cons number one
  • Cons number two
  • COns number three



8. Creality CR-10S Prusa I3 FDM 3D Printer

Creality CR-10S Prusa I3 FDM 3D PrinterCreality CR-10S took no time to leapfrog over its counterparts in the popularity chart. And this fame owes mainly to its affordable price and gigantic volume, which lets you print massive sized models with ease.

It’s due to these two qualities that Creality CR-10S became the favorite printer of a large community of hobbyists, professionals, and educationists.

One should expect nothing fancy about Creality CR-10S’s design and build. The first impression it would give you is of a quite clumsy build with an open frame screaming minimalism. However, it is not scattered like other Creality printers as it has a separate control box that resides its LCD interface in. Its USB slots and spool holder are laid neatly on the top of the control box giving a tidy look. Moreover, you will not see it being webbed with wires as other Creality printers because all its cables are decently secured at one side.

Assembling Creality CR-10S is quite straightforward with all the necessary tools and spare parts included in the box. Although its instruction manual has multiple ambiguities and should be worked upon, the assembly procedure is made easy even for beginners. You can easily load its filament yourself without much help from the manual.

Since Creality is not said to have good quality control, I would advise you to meticulously ensure before commanding it for the first print that none of its parts is out of place and no screws are left loose so that issues during operations may be avoided.

The good news for 3D hobbyists is that Creality CR-10S allows third party filaments too as long as they fall within the diameter of 1.75 millimeters. This flexibility makes Creality CR-10S an economical buy in the long run.

Moreover, its print bed has better adhesion and you don’t need to struggle to keep the prints stuck at the place, using routine hacks.

For the user’s comfort, it has a filament level sensor which constantly indicates the level of filament left and warns the user well before time to reload filament so that the operation may not be halted in the mid-way.

One thing Creality CR-10S doesn’t compromise on is its print quality. And this accounts for its popularity. You will find it producing detailed prints effortlessly, both at low- and high-resolution settings.

The sole downside Creality CR-10S has is prolonged prep time. Yes, it takes longer to heat its printing bed. And another bad news is that this old guy needs rest between printing two models, especially with high resolution.

In sum, if you want your printer to perform its basic duty, high-quality prints, well and can wait in between the prints, Creality CR-10S is the best choice for you.

  • Pros number one
  • Pros number two
  • Pros number three
  • Cons number one
  • Cons number two
  • COns number three



9. Official Creality CR-10 Max 3D Printer

Official Creality CR-10 Max 3D PrinterIf you don’t want your printer to be colossally and clumsily built, you should quit reading here and choose from any sleek option above.

With its 17.7×17.7×18.5 build, itis double the volume of other Creality 3D printers.

The gigantic print bed made of aluminum that you would get with your printer will be easily clipped in. It is equally easy to remove the bed at the end of printing; it helps you to take your models off the bed cleanly.

As for filament compatibility, CR-10 Max supports all the basic ABS and PLA filaments. Even flexible and exotic filaments such as TPU and PETG also go well with CR-10 Max.

Its assembly mostly involves the installation of a few screws and plugging in of electric connections, which might be a bit time taking but can’t be called difficult.

For connectivity, CR-10 Max has only two options- micro SD card or a conventional wired computer system connection with the help of a USB.

Right after setting it up, you can select your file using the touch screen controls and command the printer to print your first model.

It will not wobble even if you assign it to the biggest of projects in your schedule. Thanks to its hefty aluminum frame and the dual lead-screw design which renders its high level of stability.

Much of its stability is owed to its auto bed-leveling which functions with precision and removable build plate, which significantly reduces the risk of messing up when you take the model off the plate. This sturdiness makes CR-10 Max a reliable 3D printer for home or work.

One possible problem with large volume 3D printers could be visible layering caused by poor adhesion, warping out of the base. However, CR-10 Max addresses all these issues very well and produces finished products without any such flaws.

Moreover, it keeps its print quality smooth and consistent from beginning till the end, which results in finely done edges, precise hangings,and a flat bottom.

In all, if you have been feeling restricted with the limited volume of your current 3D printer and have been toiling hard with welding and combining your models in the post-printing process, CR-10 Max is an instant go-to 3D printer.

An obvious downside of CR-10 Max is that it takes a lot of space due to its colossal build. And don’t forget that it would require a few inches larger place than its actual size as during operations you would need to move its printing bed back and forth and load filamenttime and again. Therefore, the first thing you need to ensure while purchasing CR-10 Max is that you have an adequate place to keep it.

  • Pros number one
  • Pros number two
  • Pros number three
  • Cons number one
  • Cons number two
  • COns number three


Buying Guide

Choosing the right Creality 3D printer out of a long lineup is understandably confusing. To figure the things out for you, we have categorized the above reviewed Creality 3D printers into four broad categories.They will help you roughly determine the type of printer you require according to your needs and level.

  • Beginners-Small

These printers are reasonably priced and are relatively smaller in size. The print size falls between 220-300mm. Printers such as Ender 3 and Ender 5 fall in this bracket.

  • Beginners-Standard

The printers in this category are capable to print the models up to 300 mm.CR-10 and CR-10S Pro are placed in this category

  • Large Format

The Creality 3D printers which we placed in this category are relatively higher in their cost and can print a larger sized model, i.e. 400-500mm. CR-10S5 and the CR-10 Max are categorized in Large Format.

  • Dual Extruder

The only Creality with dual extruder is CR-10. You should go for this printer if you want to create combination models with a lot of details and hangings upon them.

Once after narrowing your choice down to one or two categories, check with the underlying considerable factors to pick the best suitable Creality 3D printer for you.



As for technology, it’s wise to choose your 3D printer incorporating either DLP (Digital Light Processing) or SLA (Stereolithography) technology as they are tried and tested to be the best for printing miniature models. On the other hand, FFA (Fused Filament Fabrication), the technology which makes use of filaments is not said to be successful with detailed paintings. It cannot mar SLA operated 3D printer in precision and details; however, it provides optimal scope for gigantic printing models and costumes.


Undoubtedly, a 3D printer that can handle various filament types and can withstand even cheaper metals like nylon, etc. will save you a lot of bucks in the future and will be an economical buy in the long run. Conversely, if you opt for a printer that reserves its proprietary right for filaments will cost you a lot in terms of money as well as availability, as those filaments can be purchase only from their company’s designated stores.

The good news is that Creality doesn’t reserve any such rights and its printers can well handle all types of filaments with equal ease.


As mentioned under the last category Duel Extruder, that out of the entire collection of 3D printers by Creality only CR-10 offers dual color prints. This particularly helps in printing miniatures that need a lot of details and precision with multi-colors.

The absence of this feature in your 3D printer translates into a long post-printing process. Therefore, choose CR-10 with double extrusion if your core job is to do multi-colored props.


Equally worth considering is the thing that how friendly or, in other words, how easy it is to use your 3D printer.

Ease of use includes many things, such as assembly procedure after unboxing, then ease during printing operations, and the convenience a 3D printer offers in post-printing processes. The ease in post-operation includes convenience in plucking the model off smoothly without any damage. Then comes maintenance, you need to check how demanding and time taking is the maintenance and tuning of the 3D printer you have opted for.

I would advise going for the one which doesn’t require assembly from the scratch, especially if you a first-time user.

Similarly, make sure it has an auto bed-leveling system as manual leveling can result in completely botched up models sometimes.

Lastly, a 3D printer with an auto cleanliness option and very low maintenance should be the best pick.

Stability of Structure

Precisely, a better 3D printer has always a solid and stable structure composed of hard steel, aluminum, or other metals. On the other hand, if you choose a plastic body, which might appear to be more appealing to the eyes, at first sight,it will wobble during printing and affect the details of your printing model.

Place of Use

It is an over-looked but highly considerable factor as some Creality DLP/SLA 3D printers need to be installed at such a place where they can have a cleaning tank and a curing spot with it as some of their parts have to be cleaned and cured by UV lights again and again. And all this requires a sizeable space to run smoothly.

Environmental Considerations

Given the fact that 3D printers are mostly used indoors by professionals, enthusiasts, and hobbyists, you should prefer buying the one which doesn’t emit any toxic fumes to pollute the environment you are breathing in.

Additive Features

Also, worth considering are some additional features that are being offered by some recent Creality models, though at a higher price.

These features include a touch screen with a user-friendly interface

A filament level gauge which keeps updating the user with the remaining level of filament and timely warns to reload before it completely runs out.

Another feature to consider is a pre-constructed cartridge that comes loaded with filament which saves you from the trouble of threading your filament manually every time you print.

Yet another considerable feature is failsafe, which is a print resuming feature and in case of accidental power cut remembers where it left the operation and resumes from there as soon as the power is recovered. This saves you from a lot of messing and wasting material.

As for customers’ technical support and active community on social media sites for problems like adhesion, stringing and layers, you don’t need to worry as Creality has the best of both.


Either you are a geek or an expert in 3d printing, the Creality lineup of 3D printers will always be a reliable and durable choice. Our well-compiled list of 9 Best Creality 3D Printers with comparative commentary by our 3D experts along with a detailed buying guide will certainly help you make a qualified decision.


  1. Which Creality 3D printer is the best?

Much of it depends on your requirements and budget. However, CR-10 is an all-time favorite Creality 3D printer in terms of performance, build, printing quality, price, user-friendliness, and durability.

  1. How to build the CrealityCR-10 3D printer?

The assembly for CR-10 is almost the same as CR-10S. After unboxing, check that you keep the frame with its print surface down. You will find the adjustments to screw the rollers on the outer side of each rail. After flipping the frame over with its printing surface down, adjust it all up. Try doing one side at a time. To tension the belt, first loosen all the four bolts. Then fasten them up making sure that the bracket is away from the printing bed.


  1. How to make G code for my Creality 3D printer?

You don’t need to write each code yourself as the process is made easier by Cura software which you will find inside the pen drive or the USB port. Insert it into your system port and import your 3D printer model into Cura and choose to click Save Tool Path if you are satisfied with the settings. It will export G code for your printer. Once you are done with exporting, eject the drive and insert it in your 3D printer’s SD card port. It will enable you to select and print your model by using the controls on display and the scroll knob.

  1. How to fix 3D printer stringing CrealityCR-10?

You can well avoid stringing by setting three factors to the ideal setting:

Retraction, Temperature, and Speed

By setting retraction, the nozzle is pulled back in between the printing operations and doesn’t leak during the travel moves. You can set your printer to auto retraction with the help of Cura which retracts by default during the travel moves.

You may also fix stringing by reducing the temperature. It makes the filament less liquid and less dripping. However, one cannot tell the exact degree of temperature which will fix the stringing issue as it varies material to material.

Lastly, setting your Creality to a relatively higher speed also overcomes the stringing problem as the nozzle gets less time to drip over.

Top 10 Best 3D Printers Under 300 Reviews & Buyer Guide

Top 10 3D printers under 300 reviews 20203D printing is a process of keeping three dimensional objects from a digital design model in a rigorous way. For this unexceptional printing, all we need is a 3D printer.

A 3D printer may come in different sizes, colors, and designs. People use 3D printers in schools, offices and other indoor places for creating 3D models. Well, if you are familiar with 3D printing but not having much budget then you should go through our suggestive 3D printer list.

For me searching a low price 3D printer means having a tin box with raw fitted parts. When you search a budget effective 3D printing machine then the possibility of poorly written and incomplete documentation is much high.

In the local market may a shop keeper can suggest some of its well selling 3D printing machines but online you cannot rely on an ordinary online store but only Amazon.

After doing a lot of research and exploring various companies finally here we have picked 10 most considerable and cost-effective 3D printers of this year. Our selected printers will give you satisfactory results in a certain time period.

Our listed 3D printers are ideally best for printing dental, miniature, jewelry, toys, architecture, and manufacture models. However, you can use anyone one these and get fun time with 3D printings.

All of these 3D printers are well designed and mainly substantial for professional use. No problem if you are looking for individual tasks or you have client’s work. All of these printers are made for quality 3D printing.

Anyways! Without letting you bore let me start my first one 3D printer; so here we go!


Flashforge Finder Lite 3D Printers
(Editor’s Choice)
P2 Monoprice Select Mini 3D Printer v2
Official Creality Ender 3 Pro 3D Printer
Kingroon DIY Aluminum Resume 3D Printer
ANYCUBIC Photon UV LCD 3D Printer
EGOO Mars UV Photocuring LCD 3D Printer
JGMAKER Magic 3D Printer DIY Kit
LONGER LK4 3D Printer DIY Kit
QIDI TECHNOLOGY 3D Printer, X-smart
Monoprice Maker Select 3D Printer v2


1. Flashforge Finder Lite 3D Printer- Top Rated

Flashforge Finder Lite 3D PrintersFlashforge Finder lite 3D printer is a fruity type of 3D printer invented by Flashforge Company. No, more edges, no more corners, and no more temperature rising components are given in this machine.

This printer is designed with slide-in build plates to draw out printings and extreme type of finishing. The Finder lite 3D printer is able to minimize offsets through the build plate. The company has invented this machine with an upgraded nozzle structure and smooth wires.

It means you are going to experience an improved surface quality 3D printing model with inferior risks of jamming.

Further finder lite is featured with a spontaneous standardization detective system that assists slide levels. A user-friendly 3.5-inch touch screen is available for complete easiness. Now you can get instant previews of your printing through this screen.

You may consider this 3D printer for industrial designs and tool designing. Often architectures and mechanical designers should buy this amazing machine. It supports all types of filaments including PLA, PETG, TPU, Copper and also PLA.

Supper quite operating system is one its best feature that buyers like. It only creates “50 decibels” sound while working; even you may easily use finder lite in your baby’s room.

  • Fruity design
  • Patented extruder structure
  • Removable platform
  • Super quiet printing function
  • User friendly 3.5-inch touch screen
  • Supports all type of filaments
  • Packed with useful equipments
  • Looks great
  • Well made
  • Durability confirmed
  • User friendly operating system
  • Cheap 3D printer
  • Noise free operations
  • Not recommended for students
  • Not available every where



2. Monoprice Select Mini 3D Printer v2 -Cheap Affordable

Monoprice Select Mini 3D Printer v2 - White With Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D ModelsMonoprice is the name of quality productivity. Recently an amazing 3D printer is launched by this company named Mini V2 3D printer. Wide area of extruder temperature (482°F (250°C) and heated aluminum build plates makes this printer suitable for all types of filaments such as ABS, PVA, and PLA.

It supports Windows 7 and Mac OS X for the operating system. By size, it is recommended for personal use. The company offers Quality Assurance/Technical Assistance (from Monday to Friday 6 am to 6 pm); where technical supporter will assist you well.

Mini V2 has compact desktop designing with small footprints and a durable base. The open frame style of this 3D printer makes it considerable for any desk. By the factory, manufacturers assemble this machine with all type of portable accessories.

The nozzle cooling fan makes this printer extra advanced for all types of filaments. It is assembled with complete kit including; bed scraper, and Micro USB for complete connectivity. Mini v2 machine is compatible with Cura, repeater and other 3D printing software.

Sample PLA filament (-1.75mm, Filament size spool/sample- about 10ft with natural color) and Micro SD card are included with the packing thus, we can start printing just after opening the box. Further, one sample print is also given; by a user can easily get an idea for printing.

The total weight of this 3D printer is about 14 lbs and you may easily choose a white or Black color in this machine as per your choice.

  • Nozzle cooling fan and main board cooling fan
  • Includes accessory kit
  • All-metal nozzle
  • Wi-Fi, microSD card, and USB connectivity
  • 7″ IPS color screen
  • Windows and Mac compatible
  • Compatible with Cura, Repetier, and other software
  • Assembles with complete accessory kit
  • Looks awesome
  • Easy to use
  • Simple to place
  • Gives complete reliability
  • Affordable machine
  • Not available globally



3. Official Creality Ender 3 Pro 3D Printer – Best For the Money

Official Creality Ender 3 Pro 3D PrinterHere we have our first creality ender 3 pro 3D printer especially recommended for office use. Its heated base would be ready to start printing within 5 minutes only. The entire printer is covered with the quality power supply that works as a shield.

Voltage spikes and power outages will never harm this printer due to the power-control power supply. In case of power loss, the printing will remain start from the last year where it was stopped. This resume print will save your time and you will not irritate anyhow.

The official Creality ender has improved stability due to the advanced Y axis. The alteration of its control box unit moves the fan to the bottom side; due to you will have perfect printing. The company offers a magnetic bed surface for quick model elimination without spatula razor.

Official creality ender has a brand power supply that carries a lot of power at a certain output temperature. The power supply ensures less temperature fluctuation, while intensive and long prints.

Ender 3 Pro is the best machine for ABS printing due to its hotbed heat. You may cheerily consider this 3D printer for high strength and temperature filaments. All its mechanism is well qualified and sophisticatedly fitted in an aluminum outer frame.

  • Triangle-Slot cooperate with Prusa I3 frame
  • Safe Power Supply
  • Easy to install
  • Improved Mechanical Properties
  • Magnetic Build Surface
  • Patent Technology
  • Fast heating and resume printing
  • Printing stability
  • Easy to install
  • Simple to use
  • Recommended for long printings
  • Safe power supply
  • Ships with extra plug only on amazon
  • None



4. Kingroon DIY Aluminum Resume 3D Printer with Touch Screen

3D Printer, Kingroon DIY Aluminum Resume PrinterKingroon is a company that often designs products for both adult and kids use. Recently it has launched a 3D printer named (Kingroon DIY Aluminium resume printer.) well, by the name you can easily conceptualize the resume functionality that it has.

This 3D printer looks very smart and obviously having a bunch of advanced features. In spite of having a lot of tiny parts still, it is very easy and quick to assemble.

Kingroon DIY has an advanced resume printing feature to continue printing. This feature is able to continue printing from the last layer in case of having laps or power outages. This amazing machine has great functioning features and upgraded extruder is one of these.

The extruder is specially designed for reducing plugging and less extraction risk. The precision guide rail is also available in this machine, though you will have a noise-free and smooth operation. The entire mechanism of Kingroon DIY 3D printer will last the same for many years, if you use it carefully.

The manufacturer has invented this machine especially for long services so, don’t worry about the quality. It has an assisted bed leveling system by which you can make a print bed for processing setup. All its setup will give you proper ease for adjusting corner nuts of hotbed.

All this adjustment is well assembled for lifting hotbed means kingroon DIY 3D printer is all that you are looking for.

  • Filament broken detection
  • Touch screen
  • Assisted leveling system
  • Linear guides
  • Premium Printing Quality
  • Resume printing
  • Easy assembly
  • Upgraded extruder for plugging risk
  • Easy to install
  • Robust designing
  • Best gift for kids
  • Durability is confirmed
  • Affordable for every one
  • Quite smaller
  • Not available globally
  • Not shipped globally



5. ANYCUBIC Photon UV LCD 3D Printer Assembled Innovation

ANYCUBIC Photon UV LCD 3D PrinterANYCUBIC is a world-famous name that invents machines is a super classy way. Recently this company has introduced an admirable 3D printer known as (Photon UV LCD 3D printer.)

In this printer, you will have a bunch of super cool and advanced technologies that is especially combined for 3D printings. Anyways it is very easy to set up; even you can level this machine within a moment. It comes with an easy to operate slicing software.

According to professionals, ANYCUBIC UV printer is only a few steps far from the technology FDM printer. Despite tiny components still, you can easily assemble this machine with a very few minutes.

The user-friendly and smart touch screened area allows you to see and operate printing status all the time. Further, all metallic mechanism of this printer is always ready to perform long-running tasks.

Surely this amazing machine is always ready to give you smoother and detailed quality 3D printing in a short time. The high quality based resolution makes this machine most favorite of many people and that is why they highly prefer this machine.

ANYCUBIC UV printer comes in photon sized printer and looks black in color; while the total weight of this machine is about 9.5 kg. You can simply place this 3D printer in any corner of your office or home without any hesitation.

ANYCUBIC printer is simply a smart and overwhelming solution for 3D printing that meets with all of your professional and personal 3D printing needs. All its practical philosophy is based on high-quality printing; though you may easily rely on this machine.

From tiny components to bigger parts the entire structure of ANYCUBIC 3D printer is perfectly designed. All of its chamfers and curves are smooth. The industrial blue bits and red knobs of this printing machine are well anodized.

  • 2560×1440 2K HD Masking LCD
  • High Quality CNC Parts
  • Smart and User Friendly
  • Photon Slicer/Workshop
  • Efficient Printing
  • Extreme Precision and Detail
  • Best quality printer
  • Ideal of office based work
  • Easy to set
  • Full technical support
  • Sophisticatedly designed machine
  • May reduce speed after sometime



6. EGOO Mars UV Photocuring LCD 3D Printer -Most Rated

EGOO Mars UV Photocuring LCD 3D PrinterIn the range of advanced technological 3D printing machines, Elegoo mars UV is going great. This printer is mainly foremost globally; people who want high-quality 3D printed models desire Elegoo mars.

Elegoo manufacturer is designing 3D printer parts and unique component s for many years. Recently the company has introduced an admirable 3D printer meeting with all requirements of professional 3D printing. People are getting great 3D printing experience with this machine.

Elegoo mars UV has a unique steel ball design that is highly recommended for industrial use. Z-axis is only required for returning 0 points and then you can lock the level screw for start printing.

It has an advanced UV photocuring technology with a 3.5 large touch screen LCD. By this screen, the user can monitor the SD card model similar to the Windows OS. The large screen is enough to experience real-time display 3D printing process.

We are having Elegoo mars with the latest version of chitubox slicing software that takes one minute only to slice a 30MB digital file. This is the shortest time than any other third party slicing software. Through chitubox software user can hollow the model just before slicing; means a great saving of resin in the photocuring process.

  • LED Display Photocuring
  • UV Integrated Light(wavelength 405nm)
  • XY Resolution
  • Z Axis Accuracy
  • Great layer thickness
  • High printing speed
  • 5 Inch Touch Screen
  • UBS connective option
  • Unique Industrial Design
  • Off-line Printing
  • Sturdy Structure
  • Durable quality
  • Prints well
  • Full technical support
  • Highly recommended for daily tasks
  • Easy to assemble
  • Available at Amazon
  • Not available globally



7. JGMAKER Magic 3D Printer -Best Value

jGMAKER Magic 3D Printer DIY KitGJmakers has invented a magical type 3D printer that is going great in the 3D printing field. The company has designed a magic 3D printer with a grade silicon wire and aviation-grade aluminum metallic base. Further, the built-in power supply design ensures the super safe quality of this printer.

It can easily detect power and filament failure in a smart way. When things went all down then magic GJmaker magic 3D printer is the best choice to use. By having this printer you can experience great DIY fun while assembling it.

The entire printer is based on 8 particular modules; they all will require a few minutes of yours for assemble. Simply an ordinary 3D printer may need your whole evening but GJmaker magical 3D printer is not one of these.

It has a durable metal base and attachment. This machine is quite heavier than other usual 3D printing machines and the extra weight increases its stability. There is no risk of fall when you place it in a firm corner.

Due to its heavy weight, you should give it a safe place for all its key components. This printer has a removable and flexible build platform that confirms all prints follow to the bed during operation. Further, it allows you to remove your model easily once you complete the operation.

The resume printing feature makes this printer different from other GJmaker 3D printers. This technology will continue printing from the last layer where it was stopped. It is very obvious while power failure; and a smart way to save your time and filament both.

For any reason when you want to remove your SD card while printing process, then this printer will restart its prints from the last layer again.

The filament run-out detection system is one of the favorite features of professionals. The magic printer beeps when a filament goes wrong and you may simply change it. Lastly, avoid failure prints and enjoy 3D printing with the GJmaker printing machine.

  • Filament RUN-OUT detection
  • Resume printing
  • Resume print due to SD card removed accidently
  • Sturdy metal base
  • Built-in power supply
  • Removable build platform
  • Right filament holder
  • Easy to assemble
  • Simple to use
  • Flexible and removable
  • Dual resume printing
  • Gives high quality models
  • Cost effective machine
  • Quite heavier
  • Not available globally



8. LONGER LK4 3D Printer DIY Kit with 2.8″ Full Color Touch Screen

LONGER LK4 3D Printer DIY KitSimpler, smarter and technical philosophy has been applied by longer on Longer LK4 Pro 3D printer. This printer is an open-source for 3D printings that give improved results to all 3D printing lovers.

By using this machine you can apply code and share all your ideas to your community. In short words, the KL pro 3d printer is a great source for improving imagination and innovation. In the results, you have a great 3D printing experience.

In a longer LK4 pro aluminum extension profile is given that enhances its structural durability and stability. The build-in power supply design is always ready to protect the machine from sudden sparks. It has a tempered glass bed for strong bonds and fast heating.

LK4 pro 3D printer has a plug and plays TMC2208 ultra quite module for noise-free processing. According to the manufacturers, these two features provide environment comfort by the fast and quieter printings.

Thanks to its 4.4 inches colored touch screen by you can easily monitor all your printing tasks. Now, say goodbye to the old era in which you have faced manual knobs and dot matrix display awfully. Improved UI interface and easy operation a user can simply get all printing information on the color screen.

The filament detective system and resume printings are two prior features of a 3d printing machine. by resume printing you can continue your printing operation by the last layer once after losing supply and filament detection will notify you in case filaments run out.

Simply there is no need to starting your 3D printing by the first layer again means the full saving of your time and material. LK4 pro 3D printer has an open-source firmware by the user can try great ideas through changing C code.

The company assures great productivity and it offers community options for technical support. Open-source data is also concluded by the brand so, if you have any questions regarding this then you are always welcome on it.

  • Extra-Large Build Platform
  • 3-inch large touch screen
  • TMC2208 Ultra Quiet Drive
  • Recover Printing Function
  • High-Quality Extruder
  • Unique Tempered Glass Design
  • Built-in Safe Power Supply
  • New Aluminum Frame Design
  • Complete package for great 3D printing experience
  • Looks awesome
  • Well-made machine
  • Easy to use
  • Simple to place
  • Easy to operate
  • None



9. QIDI TECHNOLOGY X-smart 3d Printer

QIDI TECHNOLOGY 3D Printer, X-smartFor many years QIDI technology is looking for inventing high quality with great performing 3D printers. After 6 years finally, it has invented a jumbo pack QIDI technology 3D printer with complete affordability.

The X – smart 3D printer is full of versatility that is specially created for all. This 3D printing machine is considerable for home, school, libraries, businesses and also other educational institutes.

If you are looking for a 3D printing machine for prototyping then this X – smart is the final option for you. No one can ignore the printing quality of this printer. After opening the box within half an hour you can assemble this printer and can use it instantly.

People who wants to create accurate models then this sized 3D printer will give them completely satisfactory. X-Smart 3D Printer is featured with advanced technology like wificonnection, touch screen with rising icons is one of its high demanding features for easy operation.

This machine is equipped with a complete kit that you will like it anyway. The single extruder is given with the extra cooling fan, and the entire body is made from aviation aluminum.

The Interior structure is designed with a CNC mechanism aluminum alloy that ensures the proper stability and flexibility for printing. The X – smart QIDI technology 3D printer has a great quality enclosure that is capable of PLA, ABS, TPU and other types of filaments.

The fully metallic body is the symbol of durability means no compromise on the manufacturing. Be practical and stable with all of your 3D printing tasks, if you have X – smart partner. The window is transparent, dustproof and very quiet; this why people are preferring this machine for home education and DIY laypersons.

  • QIDI Print Slicer
  • Removable Plate
  • Newly Developed Extruder
  • 5 Inch Touch Screen
  • Fully Enclosed Device
  • QIDI TECH One-to-one Service
  • Desktop 3D printer
  • Safe
  • Easy to use
  • Durability guaranteed
  • Lack of resume printing feature
  • Not available globally



10. Monoprice Maker Select 3D Printer v2

Monoprice Maker Select 3D Printer v2Last but not least, the very best machine of our list is Monoprice maker select 3D printer. This machine is an astonishing 3D printing machine carrying advanced features. A heated build plate, 2 GB nano SD card, and sample filament are included in its features.

This machine is compatible with multiple software including cure, repeater and simplifies 3D. The maker select 3D printer is compatible with various sources like Windows, Mac OS X, and Linux. 6 particular screws take only 10 minutes to assemble and then it will be ready to start.

It has a massive sized build plate that gives extra-large space vertically. This size is able to print large models. Before printing please confirm the nozzle temperature correctly, because the nozzle temperature will decide the material type of your print is okay to proceed or not?

Before processing checking Gcode file is necessary they way you will know is the file corrupted and good for running. The heated build plate permits all types of slower cooling materials like ABS, PLA blends and modifies conditioned.

The nano SD card is enough to store sliced code files. Once you insert the SD card then connect it to Windows or Mac OS X. monoprice maker select is a wonder and cost-effective 3D printer that can be a great gift to your kids also.

Buy and use this innovative3D printer for learning new things and tricks. Take your ideas and design whatever you want to make from a paper or CAD file. According to the professionals, mnoprice maker select machine is an ideal starter machine for all your printing needs.

  • Prints with any type of 3D filament
  • Heated Build Plate
  • MicroSD Card Slot
  • Sample PLA Filament
  • Compatibility with multiple software
  • Suitable for Mac, OS X and Linux
  • Highly recommended machine
  • Well made
  • Looks great
  • Easy to assemble
  • Quick to assemble
  • Stop working in lack of power supply
  • Not available globally

Buying for 3D printer:

Things to consider for buying a 3D printer:

According to me, there are a lot of things that you should consider before purchasing a 3D printer. Sometime your best consideration will never disappoint you. Well after a lot of research and experience here I have conducted a few things that should be considered for a printer and these are!

  • Best quality
  • Best price
  • Advanced features
  • Type of 3D printer
  • Compatible slicing software
  • Online community standard
  • STL files
  • Beware of smoke that often printers contain
  • Materials used for print

Useful tips for 3D printer:

  • Try to prefer a cooling fan that cools the 3D printing part in each direction. Often 3D printers are having attached cooling fans that cool their specific heated area. A retrofitted cooling fan will maintain 3D printing airflow for long-running.
  • Having increased perimeter outlines of PLA filaments is best for creating a strong bond within each layer. Designing sensitive parts with this trick will make you inspire anyway.
  • if you have a lack of electricity then always go with a printer that has a resume features. Otherwise, 3D printing fun will be an intensive bother.

Frequently asked questions:

How much does a 3d printer cost?

An average price of an ordinary 3D printer could $700 to $1000 while the cheapest 3D printer starts around $200 approximately. High-quality 3D printers may cost thousands of dollars $$. Fortunately, the cost of 3D printers is continually going down over the last three years.

Is it expensive to 3d print?

Well, it all depends as per your budget and the plan you have for 3D printing. If you are doing something professional then you should consider something especial other ordinary filaments will give you ordinary results. For further detail, you should to the ready earlier answer of this section.

What is the best 3d printer for beginners?

In my point of view as a beginner you should start with something great for thins purpose I would like to suggest to you;

  • Flashforge Dreamer 3D Printer
  • Da Vinci Mini Wireless Beginner 3D Printer
  • Monoprice Select Mini Beginner 3D Printer
  • QIDI TECHNOLOGY 3D Printer X-one2

Creality ender 3 vs QIDI tech x smart? Which one is best?

According to both online and offline reviews, QIDI technology X-smart 3D printer is the best one 3D printing machine as compare to the Creality ender 3 Pro 3D printer.

A 3D printer is such a type of typical printing machine that creates 3D models. It designs 3D models with various types of materials including wood, gel, cardboard paper, and similar. A 3D printing machine builds three-dimensional prototypes direct instructed by a computer-aided design (CAD.) it requires slicing software for designing diagrams and patterns of a particular product.

3d printers are used in various fields like business, and in educational institutes. An average price of a 3D printer could be $700 to $1000 approximately but if you are a beginner then our selected products will surely help you. Don’t forget to read our buying guide and some FAQS given in a certain way.

Top 5 Best 3d Printers under 500$ in 2021 & Buying Guide

Top 5 Best 3d Printers under 500$ in 2020 & Buying GuideAre you a person with creative thinking and innovative thoughts, you have so many ideas circulating in your mind and you want to apply it in real world. Well you have come to the right place. Here I am going to present you the best 3D printers in which you can visualize your imagination and ideas into virtual reality and then can apply or implement it in real world.

The best printers depend on person to person and their needs or requirements. Whether you are a beginner or an expert in your filed, the best printer would be the one which offers you full features with high resolution printing at affordable cost.

Best 3D Printer

There are many factors which are considered when you are looking for best 3D printers.

Considering that you are a beginner, then you don’t need a fully equipped 3D printer with advance features, simple, reliable and easy to setup printer with user friendly interface would be enough for you to start.

But if you are an expert and you need multiple high-quality large prints in limited time using different materials and various filament colors, than definitely you must have a printer with all advance features including automation, easy to understand user interface, safety and environmental friendly.

The most important factors you need to look for in a printer are:

The type of printer you required, quality of the prints you want to produce, which material you are going to use, printing speed you need and the required build area to print. Which software will fulfill your requirements and connectivity options it offers are also an important points to consider.

And one thing which we all check is the price of the product, if the product is reliable and fulfill all of our requirements than the price does not matter for professionals as they prefer quality over price.

Considering these things in mind, we have gathered here some of the best 3D printers you can choose from even if you are at beginner level or at an expert level.


Comgrow Creality Ender 3 Pro 3D Printer
(Editor’s Choice)

ELEGOO Mars UV Photocuring LCD 3D Printer
Dremel Digilab 3D45 Award Winning 3D Printer
QIDI TECHNOLOGY New Generation 3D Printer
Flashforge Dreamer 3d Printer


 1. Comgrow Creality Ender 3 Pro 3D Printer

Comgrow Creality Ender 3 Pro 3D PrinterAs you can see the name, Comgrow is a brand in which you can trust blindly, you should feel no hesitation when purchasing Comgrow Creality products. There printers are widely used in all over the world from beginners to advanced level.

In this version of printer, you are getting a wide variety of tools and features.

It has a removable build surface plate which is one the important factor to consider when buying a new printer because the build surface of the printer is responsible for protection of your build product and maintaining the temperature throughout the surface.

This printer comes with licensed power supply which protects your printer from unexpected power shortage and in case it faces any power outage, it can resume printing from where it has left.

This printer gives you a semi assembled kit with clear instructions on how to put it all together, meanwhile learning the basic interface of the printer as you join it. The printer’s extruder is designed in a way that lessens the possibility of clogged nozzle and bad extrusion.

  • Black color with 18.96 pounds weight
  • Feasible material to use in this printer is Aluminum_1100
  • 40*40 Y axis frame design which improves stability
  • Product Dimensions: 20.9 x 15 x 7.9 inches; 18.96 pounds
  • power supply ensures stable and sufficient power
  • Can resume printing after a break
  • Perfect for STEM projects
  • Easy to assemble
  • Can be used by kids or beginners
  • Nozzle size can vary
  • Comes with an old version of software
  • Need to change setting when using different filament


2. ELEGOO Mars UV Photocuring LCD 3D Printer

ELEGOO Mars UV Photocuring LCD 3D PrinterSearching for ELEGOO products, be warned that you will not use any other company’s products after using ELEGOO’s products. The machines or equipment’s produce by this company are unmatchable and unique in every aspect.

You need fast speed printing, this product offers you the latest version of CHITUBOX, a slicer software specialized for SLA/DLP/LCD 3D printer users, the task which takes 10 minutes to complete by other printers, this printer would take a minute to do it.

ELEGOO offers its own resin comes with this product, which if used, will need in less amount and will also give you a better printing result.

The best thing about this product is that it has 3.5” inch color touch screen which means that you can do offline printing too using this printer, and the build surface it provide is equipped with steel ball balancing structure which makes the printer start as soon as you are done with assembling the product.

Even if you are new to 3D printing, you can use this product as it comes with user friendly interface which is easy to understand by everyone and semi assembled equipment so that it does not take much of you time in assembling the parts of the printer. Also, ELEGOO products comes with a package box which contains all necessary parts you need to start with.

The axis resolution given by this printer gives you an HD prints with equal accuracy and precision.

  • Color would be black
  • Material use by this printer is Aluminum
  • 5 Inch Touch Screen with USB connectivity option
  • Printing Speed is 22.5mm/h with UV integrated light source.
  • Very easy to set-up and use
  • To the point detail and incredible resolution
  • Relatively requires low maintenance
  • Little bit noisy



3. Dremel Digilab 3D45 Award Winning 3D Printer

Dremel Digilab 3D45 Award Winning 3D PrinterDremel products are always in demand for printing advance materials with high quality and accuracy. Dremel is one of the largest company who is manufacturing 3D printers from the very beginning. Their products are highly scalable and comes with advanced features and tools.

Digilab 3D45 is one of the most selling products of Dremel and surprisingly no complain has been registered yet, be it quality or reliability.

This printer is optimized and tested to print 4 types of filament: Nylon, PETG, Eco-ABS, & PLA, along with it has a motor which pulls the filament directly from the extruder.

The filament recognition system automatically changes the temperature to match the material. If your 3D print will take a long time, you can monitor and capture time-lapse videos of it using the built-in HD camera. The printer also has a built-in touch screen with in-built icons for easy setup and operation.

This printer offers multiple connectivity option including Ethernet, Wi-Fi and USB and even it has remote printing software so you can print and monitor your prints from anywhere.

The edge it has over other printers is that it has smart sensor technology, allowing effortless, accurate calibrations, and easy set-up. The touch screen shows you in real time how to precisely level the plate with just the turn of a button.

There’s also a carbon filters to protect from harmful rays and unpleasant odors.

  • Black color with 42.8 pounds weight
  • The print area supports a build volume of 10 x 6 x 6.7″, with a 50-300-micron layer resolution
  • Touchscreen Size 4.5 in (diagonal), full Color IPS with 8GB internal storage
  • Printer Size 645x406x404mm (20.3x16x15.9in)
  • Uses Nylon, ECO-ABS & PLA Filaments
  • Easy to setup with user friendly interface
  • Impressive print quality
  • Relatively quit
  • Designed to enhance safety and reliability
  • Reduced print quality when third-party filament is introduced
  • Not feasible for beginners



4. QIDI TECHNOLOGY New Generation 3D Printer

QIDI TECHNOLOGY New Generation 3D PrinterQIDI Technology printers are designed in a way that you can use it whether you are an individual or running an organization. Their printers are loaded with basic to advanced features along with attractive and suitable design. Most importantly, their printers come assembled so that your time is not wasted in assembling it.

This printer is equipped with high-quality aluminum plate which gives uniformity and solve printing faults effectively. Heating platform supports printing ABS filament as well as PLA filament.

QIDI print slicer is self-developed 3D slicing software using intelligent model segmentation technology due to which high quality prints are produced.

3D Printer has 3.5 Inch touch screen, which make it sensitive, and avoid screen distortion. The LCD touch screen design allows you to experience a more user-friendly 3D printer interface.

QIDI technology 3d printer use upgraded protective cover of the extruder which gives it better ventilation. Also, it has 2 layered structure which gives more stability, long life and makes it more resistant to heat.

Heating bed of this printer is made up of aviation Aluminum due to which the model adheres well on the bed.

  • Printing Size: 5.5*5.5*5.5 Inch
  • Material used is plastic
  • Build volume 5.5”x5.5”x5.5”(140x140x140mm)
  • Filament types: PLA, ABS, TPU, PETG
  • Solve the problem of uneven platform and difficult model.
  • Support both printing PLA and ABS filaments
  • Reliable, durable and cost-effective
  • Produces prints of excellent quality in little time
  • Very noisy while in operation



5. Flashforge Dreamer 3d Printer, Dual Extruder, Fully Enclosed Chamber

Flashforge Dreamer 3d PrinterFlashforge is a company which is manufacturing 3D printing equipment’s and materials since many years and now is considered one of the topmost company in the world, providing stable and high quality products. Their printers are best used for professional and as well as for personal use.

Their printers arrive pre-assembled with quick start guide so you don’t need time in assembling it.

Talking about the outer body, this printer has been built with high quality plastic alloy with removable covers for ventilation and maintenance purpose, this makes it ideal for stabilizing the inner temperature and protects the print from external interference.

This printer has a built in 3.5-inch full-color HD IPS touchscreen integrated into the front panel, it is very responsive and easy to navigate, and it support multiple languages. It also uses dual extruder which allows printing of multiple color objects at the same time.

Including WIFI, this printer has SD card reader slot and a USB-to-PC port along with this printer itself has 4GB of onboard memory to store prints.

Flashforge has its own developed slicing software but it is not necessary to use it, you can use any software you want. The print quality of this printer is unmatchable regardless of how big your model is and how much time it takes.

  • ARM Cortex-M4 CPU processor, computing faster
  • IPS material 3.5 in multi-language touchscreen LCD panel operation
  • Built-in 4g memory support with storing file and folder
  • Can upgrade firmware on the machine, to keep it always up-to-date
  • Support with USB 2.0 / 32G memory card
  • Support with Windows XP/7/8 32/64 bit, Linux, and Mac OS
  • Enclosed chamber insulating temperature reducing external interference
  • Built-in multiple user-defined LED pixel strips
  • Size: 12.6” x 18.4” x 15”
  • Weight: 25 pounds
  • Build Volume: 9.1” x 5.9” x 5.5”
  • Pros number one
  • Pros number two
  • Pros number three
  • Cons number one
  • Cons number two
  • COns number three